You can access the Echolink gateway on 430.0375MHz. A CTCSS tone of 79.7Hz is required.
So, here's how to use the system! Firstly, be aware this is a SIMPLEX node. Do not select your repeater
shift. Also, no toneburst is required. If you do send a toneburst, the link will sit there quietly doing nothing. All commands
to the system are accomplished by DTMF tone sequences. Also remember to set your CTCSS to 79.7Hz. Without this, the radio
will not hear you. I regret having to use CTCSS but as I share the frequency with another node in the Manchester area it is
necessary to minimise interference.
To connect to another node, key your transmitter and dial the node number and wait to be connected. A voice message will
inform you of the progress of your call.
Other useful functions are as follows - 88* will read you a simple help file. 00* will tell you the accurate time. 99*
will read the current weather for the area. 44* will give you a 7 day weather forecast although be advised this is a rather
long file!
Please take a moment to visit the site of Mark, G4EID at http://irlp.g4eid.co.uk where you will find much useful information on the subject of internet linking in amateur radio.
If you're not sure where to start when dialling node numbers, here is an active list. http://www.echolink.org/logins.asp
In the event you don't possess a DTMF microphone for sending the control sequences you can click on the following link
and you will be see a pad, that can be used from your computer. A sound card and speakers are obviously required...... http://www.dsptutor.freeuk.com/dtmf/TG102.html
Hand portable coverage - Ainsdale, Birkdale, Freshfield, Formby, Halsall, Scarisbrick
Mobile coverage - As above plus central Southport, Ormskirk and north Liverpool, Lytham St. Annes
and parts of Blackpool.
Hours of operation - As close to 24 hours a day as the NoV will allow although Sunday to Friday
is most likely.
My sincere thanks to Graham, G6WZO for donating a dedicated server on which to run the Echolink system.
Items for Sale!
Huge quantity of UCH21 Valves. Contact me via the link at the top of the page for further information.